S100A12 is involved in the pathology of osteoarthritis by promoting M1 macrophage polarization via the NF-κB pathway.

BACKGROUND: Osteoarthritis (OA) is a degenerative joint disease that affects millions worldwide. Synovitis and macrophage polarization are important factors in the development of OA. However, the specific components of synovial fluid (SF) responsible for promoting macrophage polarization remain unclear. METHODS: Semi-quantitative antibody arrays were used to outline the proteome of SF. Differential expression analysis and GO/KEGG were performed on the obtained data. Immunohistochemistry and ELISA were used to investigate the relationship between SF S100A12 levels and synovitis levels in clinalclinical samples. In vitro cell experiments were conducted to investigate the effect of S100A12 on macrophage polarization. Public databases were utilized to predict and construct an S100A12-centered lncRNA-miRNA-mRNA competing endogenous RNA network, which was preliminarily validated using GEO datasets. RESULTS: The study outlines the protein profile in OA and non-OA SF. The results showed that the S100A12 level was significantly increased in OA SF and inflammatory chondrocytes. The OA synovium had more severe synovitis and higher levels of S100A12 than non-OA synovium. Exogenous S100A12 upregulated the levels of M1 markers and phosphorylated p65 and promoted p65 nuclear translocation, while pretreatment with BAY 11-7082 reversed these changes. It was also discovered that LINC00894 was upregulated in OA and significantly correlated with S100A12, potentially regulating S100A12 expression by acting as a miRNA sponge. CONCLUSIONS: This study demonstrated that S100A12 promotes M1 macrophage polarization through the NF-κB pathway, and found that LINC00894 has the potential to regulate the expression of S100A12 as a therapeutic approach.

Impact of sustentaculum tali screw positioning on radiographic and functional outcomes in calcaneal fractures.

BACKGROUND: To investigate whether accurate placement of sustentaculum tali screws have the impacts on the clinical efficacy of calcaneal fractures. METHODS: A retrospective analysis of 72 cases (73 feet) of calcaneal fractures from September 2015 to September 2019 treated with open reduction and internal fixation with sustentaculum tali screws was conducted. Patients were divided into the sustentaculum tali fixation group (ST group) and the sustentaculum fragment fixation group (STF group) according to the location of the sustentaculum tali screw placement. The functional outcomes at preoperative, 7 days and 1 year postoperative were collected and analyzed. RESULTS: In the ST group (40 feet), the Gissane's angle altered from (109.89 ± 12.13)° to (121.23 ± 9.34)° and (119.08 ± 8.31)° at 7 days and 1 year postoperative, respectively. For Böhler's angles altered from (11.44 ± 5.94)°, to (31.39 ± 7.54)°, and (30.61 ± 7.94)° at 7 days and 1 year postoperative, respectively. In the STF group (33 feet), Gissane's angle altered from (110.47 ± 14.45)°, to (122.08 ± 8.84)°, and (120.67 ± 9.07)° and Böhler's angle altered from (11.32 ± 6.77)°, to (28.82 ± 8.52)°, and (28.25 ± 9.13)° (P < 0.001). However, there was no statistically significant difference in functional outcomes at 1 week after surgery and 1 year after surgery (P > 0.05). The AOFAS scores at the final follow-up of the two groups: ST group (88.95 ± 6.16) and STF group (89.78 ± 8.76); VAS scores, ST group (0.83 ± 0.98) and STF group (1.03 ± 1.59), all differences were not statistically significant (P > 0.05). CONCLUSION: The position of sustentaculum tali screws has no significant difference on the short-term clinical outcome in patients with calcaneal fractures, while reliable fixation of screws to sustentaculum tali fragment can achieve similar clinical outcome.

Integrating coaxial electrospinning and 3D printing technologies for the development of biphasic porous scaffolds enabling spatiotemporal control in tumor ablation and osteochondral regeneration.

The osteochondral defects (OCDs) resulting from the treatment of giant cell tumors of bone (GCTB) often present two challenges for clinicians: tumor residue leading to local recurrence and non-healing of OCDs. Therefore, this study focuses on developing a double-layer PGPC-PGPH scaffold using shell-core structure nanofibers to achieve "spatiotemporal control" for treating OCDs caused by GCTB. It addresses two key challenges: eliminating tumor residue after local excision and stimulating osteochondral regeneration in non-healing OCD cases. With a shell layer of protoporphyrin IX (PpIX)/gelatin (GT) and inner cores containing chondroitin sulfate (CS)/poly(lactic-co-glycolic acid) (PLGA) or hydroxyapatite (HA)/PLGA, coaxial electrospinning technology was used to create shell-core structured PpIX/GT-CS/PLGA and PpIX/GT-HA/PLGA nanofibers. These nanofibers were shattered into nano-scaled short fibers, and then combined with polyethylene oxide and hyaluronan to formulate distinct 3D printing inks. The upper layer consists of PpIX/GT-CS/PLGA ink, and the lower layer is made from PpIX/GT-HA/PLGA ink, allowing for the creation of a double-layer PGPC-PGPH scaffold using 3D printing technique. After GCTB lesion removal, the PGPC-PGPH scaffold is surgically implanted into the OCDs. The sonosensitizer PpIX in the shell layer undergoes sonodynamic therapy to selectively damage GCTB tissue, effectively eradicating residual tumors. Subsequently, the thermal effect of sonodynamic therapy accelerates the shell degradation and release of CS and HA within the core layer, promoting stem cell differentiation into cartilage and bone tissues at the OCD site in the correct anatomical position. This innovative scaffold provides temporal control for anti-tumor treatment followed by tissue repair and spatial control for precise osteochondral regeneration.

What's the clinical significance of VAS, AOFAS, and SF-36 in progressive collapsing foot deformity.

BACKGROUND: This study aimed to ascertain the minimal clinically important difference (MCID), and substantial clinical benefit (SCB) of the American Orthopedic Foot and Ankle Society (AOFAS) scale, visual analog scale (VAS) for pain, and Short Form-36 Health Survey (SF-36) in progressive collapsing foot deformity (PCFD) surgery. METHODS: In this retrospective cohort study, a total of 84 patients with PCFD (84 feet) who underwent surgery between July 2015 and April 2021 were included. The study assessed the patients' subjective perception, as well as their VAS, AOFAS, and SF-36 scores at a minimum two-year follow-up, and these data were subjected to statistical analysis. The study utilized Spearman correlation analysis to determine the degree of correlation between patients' subjective perception and their VAS, AOFAS, and SF-36 scores. The minimal detectable change (MDC), MCID, and SCB for VAS, AOFAS, and SF-36 were calculated using both distribution- and anchor-based methods. The classification outcomes obtained from the distribution- and anchor-based methods were assessed using Cohen's kappa. RESULTS: Based on the subjective perception of the patients, a total of 84 individuals were categorized into three groups, with 7 in the no improvement group, 14 in the minimum improvement group, and 63 in the substantial improvement group. Spearman's correlation analysis indicated that the patients' subjective perception exhibited a moderate to strong association with VAS, AOFAS, SF-36 PCS, and SF-36 MCS, with all coefficients exceeding 0.4. The MCID of VAS, AOFAS, SF-36 PCS, and SF-36 MCS in PCFD surgery were determined to be 0.93, 5.84, 4.15, and 4.10 points using the distribution-based method and 1.50, 10.50, 8.34, and 3.03 points using the anchor-based method. The SCB of VAS, AOFAS, SF-36 PCS, and SF-36 MCS in PCFD surgery were 2.50, 18.50, 11.88, and 6.34 points, respectively. Moreover, the preliminary internal validation efforts have demonstrated the practical application and clinical utility of these findings. With the exception of the distribution-based MCID of SF-36 PCS, which showed fair agreement, all other measures demonstrated moderate to almost perfect agreement. CONCLUSIONS: The MDC, MCID, and SCB intuitively enhance the interpretation of VAS, AOFAS, and SF-36 in PCFD surgery, assisting all stakeholders to better understand the therapeutic benefits and limitations of clinical care, and thus to make a more rational decision. Each of these parameters has its own emphasis and complements the others. These parameters are recommended for evaluating the clinical relevance of the results, and their promotion should extend to other areas of foot and ankle surgery.

Comparison of different fibula procedures in tibiotalocalcaneal arthrodesis with a retrograde intramedullary nail: a mid-term retrospective study.

BACKGROUND: Tibiotalocalcaneal (TTC) arthrodesis with a retrograde intramedullary nail for severe tibiotalar and talocalcaneal arthritis has a high fusion rate; however, no studies have focused on how to handle the fibula intraoperatively to achieve better results. This study aimed to compare the efficacies of various fibular procedures. METHODS: We retrospectively reviewed the cases of severe tibiotalar and talocalcaneal arthritis in adults treated with TTC arthrodesis using a retrograde intramedullary nail between January 2012 and July 2017. The patients were divided into three groups according to different fibular procedures: Fibular osteotomy (FO), fibular strut (FS), and fibular preservation (FP). Functional outcomes and pain were assessed using the American Orthopedic Foot and Ankle Society (AOFAS) ankle and hindfoot score and visual analog scales (VAS), respectively. The operation time, fusion time, radiographic evaluation, and complications were also recorded. RESULTS: Fifty-eight patients with an average age of 53.2 (range, 32-69) years were enrolled in the final analysis. The numbers of patients enrolled in the three groups were 21, 19, and 18 in the FO, FS, and FP groups, respectively. The mean postoperative follow-up time was 66.0 (range, 60-78) months. All groups showed a high fusion rate (90.5% for FO, 94.7% for FS, and 94.4% for FP) and significant improvement in AOFAS ankle and hindfoot scores and VAS scores at the latest follow-up. There were no significant differences in these parameters among the three groups. The mean operation time of FS (131.3 ± 17.1 min) was longer than that of FO (119.3 ± 11.7 min) and FS (112.2 ± 12.6 min), but the fusion time was shorter (15.1 ± 2.8 weeks for FS, 17.2 ± 1.9 weeks for FO, and 16.8 ± 1.9 weeks for FP). Statistically significant differences were observed in these parameters. CONCLUSIONS: TTC arthrodesis using a retrograde intramedullary nail is an effective procedure with a high rate of fusion to treat severe tibiotalar and talocalcaneal arthritis in adults; however, FSs can shorten fusion time when compared with FO and FP. LEVEL OF CLINICAL EVIDENCE: Level 3.

Routine Workflow of Spatial Proteomics on Micro-formalin-Fixed Paraffin-Embedded Tissues.

In the era of single-cell biology, spatial proteomics has emerged as an important frontier. However, it still faces several challenges in technology. Formalin-fixed paraffin-embedded (FFPE) tissues are an important material in spatial proteomics, in which fixed tissues are excised using laser capture microdissection (LCM), followed by protein identification with mass spectrometry. For a satisfied spatial proteomics upon FFPE tissues, the excision area is expected to be as small as possible, and the identified proteins are countered upon as much as possible. For a general laboratory for spatial proteomics, a routine workflow is required, not relying on any special device, and is easily operating. In view of these challenges in technology, we initiated a technology evaluation throughout the entire procedure of proteomic analysis with micro-FFPE tissues. In contrast to the protocols reported previously, several innovations in technology were proposed and conducted, such as removal of destaining, decross-linking with "hang-down", solution simplification for peptide generation and balancing to excision area, and capture rate of micro-FFPE tissues. After optimization of all the necessary steps, a routine workflow was established, in which the minimized area for protein identification was 0.002 mm2, while the excision area for a consistent proteomic analysis was 0.05 mm2. Using the developed workflow and collecting the micro-FFPE tissues continuously, for the first time, a spatial proteomic atlas of mouse brain was preliminarily constructed, which exhibited the typical characteristics of spatial-dependent protein abundance and functional enrichment.

Hydrogen and Oxygen Isotope Fractionation Effects in Different Organ Tissues of Grapes under Drought Conditions.

A study of different grapevine tissues and organs (root, stem, leaf, fruit) water isotope fractionation models from high-quality wine grapes produced in the Helan Mountains, a key wine-producing area in northwestern China, was undertaken. Results showed that δ2H values of local groundwater sources were more negative than rivers and precipitation. Soil water δ2H and δ18O values were significantly higher than those of other environmental water sources. Water from the soil surface layer (0-30 cm, δ2H and δ18O values) was more positive than the deeper layer (30-60 cm), indicating that soil water has undergone a positive fractionation effect. δ2H and δ18O values of tissues and organs from different grape varieties followed a similar pattern but were more negative than the local atmospheric precipitation line (slope between 4.1 to 5.2). The 2H and 18O fractionation relationship in grapevine organs was similar, and 18O has a higher fractionation effect than 2H. δ2H and δ18O values showed a strong fractionation effect during the transportation of water to different grape organs (trend of stem > fruit > leaf). This study showed that 18/16O fractionation in grapes is more likely to occur under drought conditions and provides a theoretical basis to improve traceability accuracy and origin protection of wine production areas.

Quantitative Evaluation of the Influence of Posterior Malleolus Fracture and Fixation on the Rotational Stability of the Ankle.

Background: This study aimed to analyze quantitative correlation between the posterior malleolus fracture and fixation and the rotational stability of the ankle and to explore supplementary surgical indications for posterior malleolus fracture. Methods: Twenty fresh frozen cadaver specimens were selected and dissected. Based on the tibial insertion of the ligament complex, the model for the supination external rotation stage 3 ankle fracture with a posterior malleolar fragment and syndesmosis diastasis was created. The area threshold of the posterior tibial insertion of posterior malleolus fracture was biomechanically assessed and the difference of the antirotating ability stiffness of the ankle between simple posterior malleolus fixation and simple syndesmotic fixation was analyzed statistically. Results: The tibial insertion of posterior inferior tibiofibular ligament and inferior transverse tibiofibular ligament complex was relatively broad, and its width decreased as the distance from the joint line increased. Biomechanical analysis showed that: the threshold of posterior area of posterior malleolus fracture was 1/4S; posterior malleolus fixation provided better rotational stability than syndesmotic fixation (P < 0.01). Conclusion: The surgical indications for posterior malleolus fracture should consider simultaneously the restoration of the axial and rotational stability of the ankle. Simple posterior malleolus fracture fixation is recommended when the syndesmosis is unstable and the area ratio of posterior tibial insertion of posterior malleolus fracture is greater than or equal to 1/4. Syndesmotic fixation is proposed to restore and maintain the rotational stability of the ankle when the syndesmosis is unstable and the area ratio is less than 1/4. Regardless of the area ratio, the surgical indication only depends on the impact of the posterior malleolus fracture on the axial stability of tibiotalar joint, the involved articular surface area, and the displacement degree of posterior malleolus fragment, when the syndesmosis is stable.

[Establishment of finite element model of varus-type ankle arthritis and biomechanical analysis of different correction models for tibial anterior surface angle].

Objective: To establish the finite element model of varus-type ankle arthritis and to implement the finite element mechanical analysis of different correction models for tibial anterior surface angle (TAS) in supramalleolar osteotomy. Methods: A female patient with left varus-type ankle arthritis (Takakura stage Ⅱ, TAS 78°) was taken as the study object. Based on the CT data, the three-dimensional model of varus-type ankle arthritis (TAS 78°) and different TAS correction models [normal (TAS 89°), 5° valgus (TAS 94°), and 10° valgus (TAS 99°)] were created by software Mimics 21.0, Geomagic Wrap 2021, Solidworks 2017, and Workbench 17.0. The 290 N vertical downward force was applied to the upper surface of the tibia and 60 N vertical downward force to the upper surface of the fibula. Von Mises stress distribution and stress peak were calculated. Results: The finite element model of normal TAS was basically consistent with biomechanics of the foot. According to biomechanical analysis, the maximum stress of the varus model appeared in the medial tibiotalar joint surface and the medial part of the top tibiotalar joint surface. The stress distribution of talofibular joint surface and the lateral part of the top tibiotalar joint surface were uniform. In the normal model, the stress distributions of the talofibular joint surface and the tibiotalar joint surface were uniform, and no obvious stress concentration was observed. The maximum stress in the 5° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress distribution of medial tibiotalar joint surface was uniform. The maximum stress of the 10° valgus model appeared at the posterior part of the talofibular joint surface and the lateral part of the top tibiotalar joint surface. The stress on the medial tibiotalar joint surface increased. Conclusion: With the increase of valgus, the stress of ankle joint gradually shift outwards, and the stress concentration tends to appear. There was no obvious obstruction of fibula with 10° TAS correction. However, when TAS correction exceeds 10° and continues to increase, the obstruction effect of fibula becomes increasingly significant.

Analysis of the epidemiological characteristics of posterior malleolus fracture in adults.

BACKGROUND: This study explores the latest epidemiological characteristics of posterior malleolus fracture and compares the epidemiological differences of posterior malleolus fracture in different periods, regions, and adult age groups. METHODS: Clinical information of inpatients with posterior malleolus fracture in Shanghai Tongji Hospital and Karamay Central Hospital from January 2014 to February 2022 was reviewed and collected. The imaging data of patients were acquired using the Picture Archiving and Communication Systems. A statistical analysis was performed as to gender, current age, year of admission, injury mechanism, fracture type, and posterior malleolus fracture classification. Moreover, a comparative analysis was conducted on the injury mechanisms and morphological differences of posterior malleolus fracture at different periods, regions, and age groups. RESULTS: A total of 472 patients (210 patients from Shanghai Tongji Hospital and 262 patients from Karamay Central Hospital) with posterior malleolus fracture and an average age of 48.7 ± 15.6 were included in this study. The peak of posterior malleolus fracture occurs in the age group of 50-59. The injury mechanisms mainly involve low-energy fall and sprain (411 cases, 87.1%), followed by traffic accidents (52 cases, 11.0%), and fall injury from height (9 cases, 1.9%). With aging, the number of fall and sprain cases increases and reaches the peak at the age of 50-59, followed by progressive decline. Traffic accidents presents a relatively flat small peak in the age group of 40-59. The number of cases according to different fracture types shows the following ascending order: trimalleolar fracture-supination external rotation (335 cases, 71.0%) > bimalleolar fracture (60 cases, 12.7%) > trimalleolar fracture-pronation extorsion (43 cases, 9.1%) > posterior malleolus + tibial shaft fracture (19 cases, 4.0%) > simple posterior malleolus fracture (15 cases, 3.2%). The numbers of cases corresponding to the Haraguchi I Type, II Type, and III Type of posterior malleolus fractures were 369 (78.2%), 49 (10.4%), and 54 (11.4%), respectively. The Tongji IIA Type represented the highest number of cases (249 cases, 52.8%), followed by the IIB Type (120 cases, 25.4%), I Type (54 cases, 11.4%), IIIB Type (36 cases, 7.6%), and IIIA type (13 cases, 2.8%). The trimalleolar fracture-supination external rotation, Haraguchi I Type and Tongji IIA Type of posterior malleolus fractures all presented an obvious peak of incidence in the age group of 50-59. However, no obvious statistical difference was observed in the injury mechanism, Haraguchi classification, and Tongji classification of posterior malleolus fractures among different years and regions in recent years (P > 0.05). CONCLUSIONS: The injury mechanism of posterior malleolus fracture mainly involves low-energy fall and sprain cases. The trimalleolar fracture-supination external rotation, Haraguchi I type and Tongji IIA type of posterior malleolus fracture are predilection fracture types, and all present an obvious incidence peak in the age group of 50-59. Elderly patients have high risks of falling and their bones are more fragile, conditions which are potential risk factors of posterior malleolus fracture. Early positive control has important significance. This study provides references for relevant basic and clinical studies of posterior malleolus fracture.

Viscoelastic Numerical Simulation Study on the Co-Extrusion Process of Tri-Composite Tire Tread.

The co-extrusion process is widely used to produce composite tire treads with better performance. This study investigated the rubber co-extrusion flow process and quality influencing factors of tri-composite tire tread through numerical simulation and experimental methods. Here, RPA 2000 rubber processing analyzer was used to carry out rheological tests on the three rubber materials, the PTT viscoelastic constitutive model was fitted, and the fitting curves were in good agreement with the test data. Then, a three-dimensional viscoelastic numerical simulation model of the tri-composite tread co-extrusion process was established using Ansys Polyflow software. The parameter evolution technique is adopted in the model establishment to improve the calculation convergence. In addition, a global remeshing function is used to avoid excessive mesh deformation. A co-extrusion experiment is conducted to verify the model's accuracy using a tri-screw extruder. The extruded tread size error rate between the experiment and simulation is less than 6%. The variation of the velocity field, pressure field and shear rate field during extrusion is analyzed, and the formation mechanism of die swell is explained simultaneously. Finally, the influence of process parameters (inflow rate and traction speed) and die structure (convergence angle and thickness) on the extruded tire tread shape and quality was investigated, which can provide theoretical guidance for improving tread quality and production efficiency. Furthermore, the numerical simulation method can assist the design of the die plate in enhancing the efficiency of the die plate design.

Integrating nanotechnology with plant microbiome for next-generation crop health.

Nanotechnology has enormous potential for sustainable agriculture, such as improving nutrient use efficiency, plant health, and food production. Nanoscale modulation of the plant-associated microbiota offers an additional valuable opportunity to increase global crop production and ensure future food and nutrient security. Nanomaterials (NMs) applied to agricultural crops can impact plant and soil microbiota, which offers valuable services to host plants, including the acquisition of nutrients, abiotic stress tolerance, and disease suppression. Dissecting the complex interactions between NMs and plants by integrating multi-omic approaches is providing new insights into how NMs can activate host responses and functionality as well as influence native microbial communities. Such nexus and moving beyond descriptive microbiome studies to hypothesis-driven research will foster microbiome engineering and open up opportunities for the development of synthetic microbial communities to provide agronomic solutions. Herein, we first summarize the significant role of NMs and the plant microbiome in crop productivity and then focus on NMs effects on plant-associated microbiota. We outline three urgent priority research areas and call for a transdisciplinary collaborative approach, involving plant scientists, soil scientists, environmental scientists, ecologists, microbiologists, taxonomists, chemists, physicists, and stakeholders, to advance nano-microbiome research. Detailed understanding of the nanomaterial-plant-microbiome interactions and the mechanisms underlying NMs-mediated shifts in the microbiome assembly and functions may help to exploit the services of both nano-objects and microbiota for next-generation crop health.

Lignin-derived carbon-supported MoC-FeNi heterostructure as efficient electrocatalysts for oxygen evolution reaction.

Developing noble-metal-free electrocatalysts for efficient oxygen evolution reactions (OER) is urgently desired to obtain green hydrogen by water electrolysis. Coupling FeNi catalysts with other transition metals is an effective strategy to improve the OER performance, but the electronic structure regulation of the catalytic center is challenging. Herein, heterostructures catalyst composed of MoC and FeNi alloy embedded in N-doped biochar (denoted as MoC-FeNi@NLC) was in situ synthesized by pyrolysis of lignin-metals coordination complex. MoC-FeNi@NLC displayed an overpotential of 198 mV and a long steady running time of 200 h at 10 mA·cm-2 in alkaline media. Furthermore, MoC-FeNi@NLC has demonstrated excellent Faradaic efficiency (FE) of over 90 %. A voltage of 1.50 V was required based on the MoC-FeNi@NLC and Pt/C coupling system, which was superior to that of commercial noble metal catalysts (Pt/C || Ir/C, 1.57 V). The density functional theory demonstrated that FeNi alloy balanced the adsorption energy of OER intermediates and regulated the orbital overlap of Mo above Fermi level. While the lignin-derived carbon layer prevented the deactivation and dissolution of catalytic center. The construction strategy of transition metal alloys and carbides heterojunction by the assistance of sustainable lignin derivatives and its structure-activity relationship toward OER electrocatalytic process provides a promising and cost-efficient pathway for the design of high-performance and stable OER catalysts.

Dynamics of heavy metals during the development and decomposition of leaves of Avicennia marina and Kandelia obovata in a subtropical mangrove swamp.

In mangrove wetlands, leaves make up a high proportion of the plant biomass and can accumulate heavy metals from contaminated sediment. Despite this, it is still unclear how heavy metal concentrations in leaves change as they develop and how metals in senescence leaves are recycled back into the mangrove ecosystems during decomposition. The present study aims to investigate the dynamics of six heavy metals (Cu, Zn, Cr, Ni, Cd, and Pb) in leaves of two common mangrove plants, Avicennia marina and Kandelia obovata, at different stages of development (young, mature, and senescent) and leaf litter decomposition (from 0 to 20 weeks). Based on litterbag experiments in a subtropical mangrove swamp, both plant species showed similar trends in alternations of the six heavy metals during leaf development, that was, decreased in Cu and Zn but increased in Pb, while Cr, Ni, and Cd remained steady. All heavy metals in litter gradually increased in concentration during decomposition. By the end of the 20-weeks decomposition, the concentrations of Cu, Zn, and Cd in decayed leaves were comparable to those in sediment, with Cu, Zn, and Cd at approximately 18, 75, and 0.2 mg·kg-1, respectively, while Cr (66 mg·kg-1), Ni (65 mg·kg-1), and Pb (55 mg·kg-1) were lower than those in sediment, indicating that metals were not retained in litter but recycled back to the sediment. Tannins in mangrove leaf litter might chelate heavy metals, affecting their migration and transformation of heavy metals in estuarine mangrove wetlands. The findings of our study provide insight into the interactions between toxic heavy metals and mangrove plant species during leaf development, representing the first example of how most metals would be retained in leaf litter during decomposition, thereby reducing their release to estuarine and marine ecosystems.

Integrated Bioinformatics and Experimental Analysis Identified TRIM28 a Potential Prognostic Biomarker and Correlated with Immune Infiltrates in Liver Hepatocellular Carcinoma.

Background: Since the 1970s, liver hepatocellular carcinoma (LIHC) has experienced a constant rise in incidence and mortality rates, making the identification of LIHC biomarkers very important. Tripartite Motif-Containing 28 (TRIM28) is a protein-coding gene which encodes the tripartite motif-containing proteins (TRIMs) family and is associated with specific chromatin regions. TRIM28 expression and its prognostic value and impact on the immune system in LIHC patients are being investigated for the first time. Methods: The TRIM28 expression data from TCGA database was used to analyze TRIM28 expression, clinicopathological information, gene enrichment, and immune infiltration and conduct additional bioinformatics analysis. R language was used for statistical analysis. TIMER, CIBERSORT, and ssGSEA were used to assess immune responses of TRIM28 in LIHC. Next, the results were validated using GEPIA, ROC analysis, and immunohistochemical staining pictures from the THPA. GSE14520, GSE63898, and GSE87630 datasets were analyzed using ROC analysis to further evaluate TRIM28's diagnostic value. To ultimately determine TRIM28 expression, we performed qRT-PCR (quantitative real-time polymerase chain reaction). Results: High TRIM28 expression level was associated with T classification, pathologic stage, histologic grade, and serum AFP levels. In patients with LIHC, TRIM28 was an independent risk factor for a poor prognosis. The pathways ligand-receptor interaction, which is critical in LIHC patients, were closely associated with TRIM28 expression, and the function of DC could be suppressed by overexpression of TRIM28. As a final step, our results were validated by GEO data and qRT-PCR. Conclusions: TRIM28 will shed new light on LIHC mechanisms. As an effective diagnostic and intervention tool, this gene will be able to diagnose and treat LIHC at an early stage.

Staged surgery for closed Lisfranc injury with dislocation.

Objective: To investigate the clinical efficacy of staged surgery for patients with closed Lisfranc injury and dislocation. Methods: This study included 48 patients with acute closed Lisfranc injury and dislocation admitted between July 2016 and July 2021. The patients were divided into two groups. 23 patients in group A underwent staged surgeries included emergency reduction within 4-8 h after injury, and open reduction and internal fixation of Lisfranc injury and first tarsometatarsal joint fusion after the swelling had subsided. 25 patients in group B underwent open reduction and internal fixation as an elective procedure after the swelling had subsided. American Orthopedic Foot and Ankle Society (AOFAS) midfoot scores and visual analog scale (VAS) scores were used for assessment at the final follow-up. Results: A total of 48 patients with closed Lisfranc injury and dislocation were included. The lengths of hospitalization were 11.52 ± 1.61 day and 19.80 ± 2.37 day in groups A and B, respectively. The total lengths of surgery were 67.34 ± 1.71 min and 104.36 ± 8.31 min in groups A and B, respectively. 48 patients completed the final follow-up (follow-up period range: 12-24 months, mean: 18 months). All fractures had healed at 12-18 weeks after surgery (mean: 14.6 weeks). At the 1-year postoperative follow-up, the AOFAS and VAS score was 86.87 ± 4.24 and 1.91 ± 0.78, respectively, during weight-bearing walking in group A patients and 71.72 ± 5.46 and 3.20 ± 1.17 in group B. By the end of the follow-up period, only 2 patients in group B had developed traumatic arthritis and no patients had joint re-dislocation or required secondary surgery. Conclusion: Staged surgery for closed Lisfranc injury with dislocation reduced the incidence of perioperative complications and achieved good surgical outcomes while shortening the lengths of surgery and hospitalization.

[Comparison of minimally invasive and traditional Chevron osteotomy in treating patients with mild to moderate hallux valgus].

OBJECTIVE: To compare minimally invasive and traditional Chevron osteotomy in treating patients with mild to moderate hallux valgus. METHODS: Clinical data of 36 patients (36 feet) with mild to moderate hallux valgus from January 2019 to February 2021 were retrospectively analyzed, and divided into minimally invasive osteotomy(minimally invasive group) and traditional Chevron osteotomy(traditional group). There were 16 patients in minimally invasive group, including 1 male and 15 females, aged from 36 to 60 years old with an average of(49.0±9.5) years old;9 were mild and 7 were moderate according to Mann classification;treated with minimally invasive osteotomy with hollow screw fixation. There were 20 patients(20 feet) in traditional group, including 2 males and 18 females, aged from 38 to 65 years old with an average of(50.0±9.2) years old;11 were mild and 9 were moderate according to Mann classification;treated with traditional Chevron osteotomy. Hallux valgus angle (HVA), intermetatarsal angle (IMA) before and after operation at 12 months bewteen two groups were observed and compared, and American Orthopedic Foot and Ankle Society (AOFAS) forefoot score and visual analogue scale (VAS) before and after operation at 6 weeks and 12 months between two groups were compared. RESULTS: Thirty-six patiens were followed up from 14 to 30 months with an average of (21.00±5.77) months. All incisions were healed well at stageⅠwithout infection. There were no significant differences in HVA, IMA, AOFAS forefoot scores and VAS before and after operation at 12 months between two groups(P>0.05). However, AOFAS forefoot scores and VAS of minimally invasive group was significantly better than that of traditionl group at 6 weeks after operation (P<0.05). Postoperative HVA, IMA, AOFAS forefoot scores and VAS at 12 months bewteen two groups were improved better than that of preoperation(P<0.05). CONCLUSION: Compared with traditional Chevron osteotomy, minimally invasive osteotomy has less trauma and quicker recovery. Both of them has similar clinical effects, and could receive satisfactory clinical effects, while treatment of minimally invasive osteotomy should pain attention to learning curve.

Classification of avulsion fractures of the fifth metatarsal base using three-dimensional CT mapping and anatomical assessment: a retrospective case series study.

BACKGROUND: To clarify the injury mechanism of the avulsion fracture of the fifth metatarsal combining 3-dimensional (3D) fracture mapping with anatomical measurements. METHODS: Two hundred twenty-two patients with the avulsion fractures of the fifth metatarsal base, who were admitted to our hospital from August 2015 to August 2020. The computed tomography (CT) scans were used to generate the 3-D images of all mapped fracture lines for the avulsion fractures of the fifth metatarsal base were compiled in an overall 3D image. The fifth metatarsal base of 8 unpaired lower limbs of adult Asian frozen cadaveric specimens were also dissected to observe and measure the specific locations of the attachment points of the peroneus brevis, lateral band of the plantar fascia, and peroneus tertius to the fifth metatarsal base. RESULTS: Based on the type of fracture line produced and the specific locations of the attachment points of the tendons or fascia, the avulsion fractures of the fifth metatarsal base can be classified into three types: type I predominantly involves the action of the lateral band of the plantar fascia; type II predominantly involves the action of the peroneus brevis; type IIIA involves the joint action of the peroneus brevis and lateral band of the plantar fascia with one fracture line, and type IIIB involves the joint action of the peroneus brevis and lateral band of the plantar fascia with two fracture lines. CONCLUSION: The lateral band of the plantar fascia and peroneus brevis play a major role, either separately or together, in avulsion fractures of the fifth metatarsal base. With this knowledge, we propose a novel classification based on the injury mechanism, which can serve as a reference for clinical treatment and diagnosis. LEVEL OF EVIDENCE: Level III, retrospective case series.

CD137 Regulates Bone Loss via the p53 Wnt/ß-Catenin Signaling Pathways in Aged Mice.

Senile osteoporosis is a chronic skeletal disease, leading to increased bone brittleness and risk of fragile fractures. With the acceleration of population aging, osteoporosis has gradually become one of the most serious and prevalent problems worldwide. Bone formation is highly dependent on the proper osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) in the bone marrow microenvironment, which is generated by the functional relationship among different cell types, including osteoblasts, adipogenic cells, and bone marrow stromal cells in the bone marrow. It is still not clear how osteoporosis is caused by its molecular mechanism. With aging, bone marrow is able to restrain osteogenesis. Discovering the underlying signals that oppose BMSC osteogenic differentiation from the bone marrow microenvironment and identifying the unusual changes in BMSCs with aging is important to elucidate possible mechanisms of senile osteoporosis. We used 3 gene expression profiles (GSE35956, GSE35957, and GSE35959) associated with osteoporosis. And a protein-protein interaction (PPI) network was also built to identify the promising gene CD137. After that, we performed in vivo experiments to verify its function and mechanism. In this experiment, we found that significant bone loss was observed in aged (18-month-old) mice compared with young (6-month-old) mice. The adipose tissue in bone marrow cavity from aged mice reached above 10 times more than young mice. Combining bioinformatics analysis and vivo experiments, we inferred that CD137 might be involved in the p53 and canonical Wnt/ß-catenin signaling pathways and thereby influenced bone mass through regulation of marrow adipogenesis. Importantly, osteoporosis can be rescued by blocking CD137 signaling in vivo. Our research will contribute to our understanding not only of the pathogenesis of age-related bone loss but also to the identification of new targets for treating senile osteoporosis.

A Prognosis Marker Dynein Cytoplasmic 1 Heavy Chain 1 Correlates with EMT and Immune Signature in Liver Hepatocellular Carcinoma by Bioinformatics and Experimental Analysis.

Background: Liver hepatocellular carcinoma (LIHC) has had a continuous increase in incidence and mortality rates over the last 40 years. Dynein Cytoplasmic 1 Heavy Chain 1 (DYNC1H1) is a protein coding gene which encodes the cytoplasmic dynein heavy chain family. This is the first investigation into the expression of DYNC1H1 and its mechanisms of action in LIHC patients. Methods: Based on the DYNC1H1 expression data from the TCGA database, we performed the DYNC1H1 expression, clinicopathological data, gene enrichment, and immune infiltration analysis. TIMER and CIBERSORT were used to assess immune responses of DYNC1H1 in LIHC. GEPIA, K-M survival analysis, and immunohistochemical staining pictures from the THPA were used to validate the results. In order to evaluate the diagnostic value of DYNC1H1, GEO datasets were analyzed by using ROC analysis. And quantitative real-time polymerase chain reaction was also carried out to evaluate the expression of DYNC1H1. Results: DYNC1H1 expression levels were associated with T classification, pathologic stage, histologic grade, and serum AFP levels. DYNC1H1 is an independent factor for a poor prognosis in patients with LIHC. Further study showed that high expression of DYNC1H1 was enriched in epithelial-mesenchymal transition (EMT) and the TGF ß signaling pathway by GSEA analysis enrichment, indicating that DYNC1H1 might play a key role in the progression of CRC through EMT and immune response, which also had been validated by the experimental assays. Conclusions: DYNC1H1 will provide a novel and important perspective for the mechanisms of LIHC by regulating EMT. This gene will be able to act as an efficacious tool for the early diagnosis and effective intervention of LIHC.